EN
7
Programming your “TOWERCHRON QM1”
Setting time of day
Rotate the minute hand of the clock until the arrowhead in clock
face aligns with the correct time on the outer dial, i�e� 8 = 8�00 a�m�,
14 = 2�00 p�m�
Setting ON/OFF times
Move all tappets between ON and OFF times required to outer
position� The minimum switching time is 15 minutes�
Set any other ON/OFF periods in a similar manner
Slide switches (under drop down cover)
Pull top edge of drop down cover to gain access to slide switch�
The slide switch provide following functions:
– OFF
service off completely
– TIMED
service comes on between ON and OFF periods as set
on tappets on clock face
– CONST� service is on continuously
ON
OFF
OFF
TIMED
CONST.
OFF
ON
ON
OFF
