background image

This manual ensures safe and efficient use of the "thermio™ essential BCP" contact thermostat
(referred to as “device” in the following). This manual is a component of the device and must remain
accessible at all times for everyone who uses the device.
Everyone who uses the device must have read and understood this manual before commencing any
work. The basic prerequisite for working safely is compliance with all safety instructions and usage
instructions specified in this manual. Furthermore, the local accident prevention regulations and the
general safety regulations apply for the operating area of the device.

Copyright

This manual is copyright protected.
Handover this manual to third parties, reproductions of any type and form – including excerpts – and
use and/or disclosure of the content without the written permission of Grässlin GmbH (referred to as
“manufacturer” in the following), except for internal purposes, is not permitted. Violations will result in
liability for compensation. The manufacturer reserves the right to assert additional claims.
The copyright is held by the manufacturer.

 

 

 

 

 

2

Содержание thermio essential BCP

































Отзывы: