GRASS VALLEY zodiak, Руководство пользователя

Страница: 225 / 458

Zodiak User Manual 225
PBus2 & GPI Menus
PBus trigger commands are by default associated with E-MEM level group
Misc 2
. You can associate PBus triggers with any E-MEM level group, not
just
Misc 2
. This is done in the Daily Setups, Suite Prefs, E-MEM Prefs menu
(see E-MEM Prefs Menu on page 160 ). To determine what E-MEM level is
currently assigned, select the
Enables
menu category button in the PBus &
GPI menu to view the Enables menu ( Figure 156 on page 225 ).
When the
Learn Recall
button in the PBus menu ( Figure 155 on page 224 ) is
active (green light on) under a device name on the left, the E-MEM Learn
and Recall register information from Zodiak is sent out for use by the
peripheral device. When the button is off, just the trigger information is
sent over the PBus to the peripheral device.
Enables Menu
Peripheral Bus II devices and triggers can be enabled and disabled in the
Enables menu, accessed by touching the
Enables
category button at the
bottom of the screen ( Figure 156 ). The left side of the menu is used for
Peripheral Bus II control. GPI Out control resides on the right side of the
menu.
Figure 156. PBus & GPI Enables Menu
Enable All
and
Disable All
buttons allow enabling or disabling all enables for
PBus and GPI outputs. Items that are disabled will not fire, even when pro-
grammed to do so by an effect.