GRASS VALLEY XIP-3901, Руководство пользователя

Страница: 35 / 308

35
3
XIP - 3901 Installation and Operation
Front Card-edge Interface
The front card-edge of the XIP­3901incorporates two elements:
• Status LED (see Card-edge Status LED , on page 35)
• Select button (see Local Control Using the Densité Frame Control Panel , on page 57)
Fig. 3-1: Front Card-edge Layout
For further information about how to troubleshoot an issue, see Troubleshooting , on
page 287.
Card-edge Status LED
The status LED is located on the front card-edge of the XIP­3901 and is visible through the
front access door of the Densité­3 frame. This LED indicates the status of the XIP­3901 using
different colors and by flashing/steady illumination.
The table shows how the various error conditions that can be flagged on the XIP­3901
affect the LED status.
• If a cell is gray, the LED cannot be configured to assume that status.
• If more than one LED status is possible for a particular error condition, the status is
configurable. See Alarm Config Panel , on page 229 for details.
• The factory default status, if available, is marked with a

symbol.
XIP - 3901 - UC,
XIP - 3901 - DC, or
XIP - 3901 - FS XIP - 3901 - UDC-IP XIP - 3901 - UDC-IF XIP - 3901 - GB-IP XIP - 3901 - JPEG XS
    
XIP‐3901
Select
Status
Status LED
SELECT button