GRASS VALLEY XCU UXF Fiber Series, Руководство пользователя

Страница: 44 / 110

44 XCU UXF Fiber Series XF Transmission Fiber Base Station User’s Guide (v1.3)
Chapter 4 - Media Network configuration
Port A+B : Monitoring video is routed to both Port A and B to establish a redundant
network connection. Refer to “IP Redundancy” on page 53 for more information about IP
Redundancy.
Off : Monitoring video is NOT inserted into the Media Network stream (this is also
indicated with the indication off in front of Stream 1).
Protocol — this is the transport protocol for Monitoring video. Select either ST2022-6
(embedded SDI with audio and anciliary data over IP) or ST2110-20 (Video essence over IP).
Port A output
Dest. IP address — the destination IP address for Port A to which Monitoring video is sent.
Dest. Port — the destination port number for Port A for Monitoring video.
Port B output
☞
Note
☞
Note
Port B is only used when redundant operation is enabled.
Dest. IP address — the destination IP address for port B to which Monitoring video is sent.
Dest. Port — the destination port number for Port A for Monitoring video.
Live video
☞
Note
☞
Note
Live video is only present when HDR is enabled and/or when the XCU is running in a 4K video
mode.
Enabled — selects whether the Live video is included in the Media Network stream and to
which port the stream is sent:
Port A : Live video is routed to Port A (default setting).
Port A+B : Live video is routed to both Port A and B to establish a redundant network
connection. Refer to “IP Redundancy” on page 53 for more information about IP
Redundancy.
Off : Live video is NOT inserted into the Media Network stream.
Protocol — this is the transport protocol for Live video. Select either ST2022-6 (embedded SDI
with audio and anciliary data over IP) or ST2110-20 (Video essence over IP).
Port A output
Dest. IP address — the destination IP address for Port A to which Live video is sent.
Dest. Port — the destination port number for Port A for Live video.