GRASS VALLEY Profile XP PVS1100, Руководство по установке

Страница: 3 / 42

18 September 2002 PVS 1100 Series Installation Guide
3
Before getting started
This installation guide provides step-by-step instructions for installing the PVS1100
Media Platform using factory default settings. After installing the PVS1100 using this
installation guide, you can refer to the Profile XP System Guide to customize system
settings for your installation.
For Grass Valley Group Customer Support information, refer to page 41 of this
Installation Guide.
About channels and factory default configuration
Profile applications use channels to control disk recording and playback. A channel
defines a grouping of Profile XP video, audio, and timecode resources and is
identified by a unique name. Profile XP software supports three channel types:
Recorder channel, Player channel, or Player/Recorder channel. For more information
on channel types and creating or modifying channels, refer the Profile XP System
Guide.
Your PVS1100 is shipped with default DVCPRO 25 video processing and
DVCPRO 25 Player/Recorder channels. These default channels are named Vtr1,
Vtr2, Vtr3 and so on. The following table describes the video and audio connections
you’ll make for each channel. On the pages that follow, you’ll find specifics about the
type and number of default channels in your system, and their video and audio I/O
connections.
Rack-mounting the PVS1100 Series Chassis
This procedure assumes you have already rack-mounted the PVS1100, Fibre Channel
RAID Chassis, I/O Panel, and audio interface option as required. For rack-mounting
information, see Appendix C, “Rack Mounting Information and Rear Panel
Drawings” in the Profile XP System Guide.
Default
channel
type Video I/O
connections Audio connections
a
a.
The number of audio I/Os is determined by your PVS 1100 Series model and the number of
Audio boards installed.
Timecode I/O
Player/
Recorder 1 SDI video input
1 SDI video output
1 analog monitor
b
b.
Available if the optional Video Monitor board is installed.
2, 4, or 8 audio I/Os Uses the internal
timecode generator.
Recorded timecode is
used to generate VITC on
the SDI video output