GRASS VALLEY Prelude Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 102

GRASS VALLEY Prelude Скачать руководство пользователя страница 14

Prelude — Instruction Manual

14

•

If a control panel is being used as a NP or RCL Server connected to an
NP or RCL Client, and the configuration size is 128 sources, 128 desti-
nations, 4 levels or larger, that control panel’s operation may be
adversely affected. In particular, if the Client makes repeated query for
destinations (i.e. QD command) or other commands, it is advised to use
a dedicated control panel as the Server. If the control panel is not dedi-
cated, the following may occur:

•

The control panel may delay its response to button pushes when it
is busy communicating with the Client.

•

The control panel may delay tally update of destinations.

•

Prelude Destination Protects and Locks apply to all configured levels.
This matches the behavior of Encore control systems. Panels with dis-
plays also report a “Locked” status for both hard locked and protected
Destinations.

•

Prelude does not support the following Native Protocol commands:

AS, CH, CT, DA, QT, ST

•

The PC monitor running the Prelude application must be set to 96dpi
(small fonts) to properly display the graphics. PC dpi display settings
can be accessed via: Start/Settings/Control Panel/Display/Settings/
Advanced/General.

•

An extremely large number of rapid consecutive button presses (70+)
or rapid salvo Takes can overload the system. The system will not crash
but may miss a button press/release cycle, resulting in undesired
results (unintended Takes, for example).

Upgrade Paths

Prelude is part of a family of related router products that offer easy upgrade
paths.

•

Acappella

is a small, single purpose router designed for out-of-box oper-

ation. It has a built-in control system that requires no configuration.
Various Acappella models are available with different hardware com-
ponents that determine each unit’s routing capabilities.

•

The

Prelude

control system software offers mid-range capabilities

intended for smaller facilities or localized applications. It can operate
with Acappella and/or Concerto matrix frames and employs Encore
and Acappella remote panels. The off-line matrix and panel configura-
tion capabilities of Prelude provides increased routing system power
and flexibility.

«
...
12
13
14
15
16
...
»

Содержание Prelude







































































































Отзывы:

Нет отзывов