GRASS VALLEY OCP 400 Скачать руководство пользователя страница 13

Страница: 13 / 60

OCP 400 Operational Control Panel User’s Guide (v12.0)

Chapter 1 - Introduction

1.5.9 Bars button

Push the

BARS

button to switch on the colour bar test signal in the connected camera. Push

the button again to select a sawtooth test signal.

–

The button lights (green) when Bars are on.

–

The button lights (yellow) when the sawtooth test signal is on.

1.5.10 Call button

Push the

CALL

button to send a signal to the connected camera calling for attention.

–

The

CALL

button lights when it is activated or when a call is received from another

system part.

–

If active, push again to switch off.

–

(A buzzer signal can be associated with the call signal.)

1.5.11 Using the menu panel

The menu panel contains a display and eight buttons for selecting items in the menu system.
The main operational tasks of the menu panel are:

–

to provide access to parameters for setting up the OCP, the XCU/Base Station and the
camera.

–

to display function menus and values when a direct video parameter button is pushed.

–

to display the status of a set of functions.

Selection buttons

The function of the four arrow buttons in the centre of the menu panel is determined by the
item appearing next to them on the display. Push the button associated with the item displayed
to select this item.

Toggle button

This button is used in some submenus to toggle between two values.

Prev(ious) / Next button

Push these buttons to move up and down through the various menu pages.

Exit button

Push this button to exit the current menu and return to the monitoring pages.

Illumination

The menu panel buttons are illuminated to indicate their state:

•

not lit: no function for that button

•

low light: function available; push to change or to assign to rotary control.

•

bright light: function is assigned to rotary control.

Содержание OCP 400




























































Результаты поиска

Содержание OCP 400

Отзывы:

Бренды по названию

Популярные бренды

GRASS VALLEY OCP 400, Руководство пользователя

Результаты поиска

Содержание OCP 400

Отзывы:

Бренды по названию

Популярные бренды