GRASS VALLEY NV9649, Руководство пользователя

Страница: 130 / 167

120
Operation
Menus under the NV9609 Model
To go back to the ‘Manage Configs’ menu, press ‘Exit Recall’ at the right.
To clear a named setup, simply press the button for that named setup.
Be cautious: doing so removes data that cannot easily be recovered. The menu presents a
warning to which you must respond before you can proceed:
Press the red button (that read “Push if you are sure”) to continue with the clear.

Whenever you recall, save, or clear any named setup, that setup becomes the current
setup. Subsequent source and destination assignments are recorded in the current
setup and other setups are not affected.
Reboot
The ‘Reboot’ button of the menu lets you restart the NV9649 and all the NV9649 clients
associated with it.
If you press the reboot button, the menu presents a cautionary sub-menu:
Press ‘Reboot’ (the red button) if you want to proceed. A reboot takes several seconds.
Press ‘Cancel’ if you do not want to reboot.
Menus under the NV9609 Model
Under the NV9609 behavioral model, the menu functions as if it were an NV9609 menu as
much as is possible. (Under this model, the menu presents information in the 4 displays in
the middle of the panel.
By pressing the menu button repeatedly, you can cycle through 8 sub-menus:
• Software Versions • Panel name
• User ID • User name
• Software version • Boot version
• Application Version • Low button illumination level
PUSH IF
YOU ARE
SURE!
CANCEL
CLEAR
EXIT
CLEAR
PANEL ID
6491
CANCEL RE–BOOT