manualshive.com logo in svg

GRASS VALLEY NV9649, Руководство пользователя

Поделиться
Скачать
GRASS VALLEY NV9649 Скачать руководство пользователя страница 113

103

NV9649

User’s Guide

Normally, the button text is the source’s mnemonic, but the configurer can assign any text 
to the button. 

Salvo 

The button presets a salvo. (Subsequently pressing the ‘Take’ button actually executes the 
salvo.)

The default button text is the salvo name but the button can have any legend.

Save Preset 

This button is a toggle: it enables or disables “save preset” mode. When this function is 
enabled (and the button is high tally), whatever is on preset is retained on preset after a 
take. When the function is disabled (its button is low tally), whatever is on preset is 
discarded after a take.

The default button text is “Save Preset” but the button can have any legend.

Selection 

In X-Y mode, the display shows levels and selection buttons select or deselect levels. In MD 
mode, the display shows MD destinations and the selection buttons select or deselect MD 
destinations. A selection button is high-tally when its associated level or MD destination is 
selected and low-tally when it is not selected. Sometimes selection buttons are dark, 
meaning that the level or MD destination is either not in use or not available.

X-Y Mode 

When the panel is in X-Y mode, a selection button represents a virtual level present on the 
alphanumeric display. Pressing one or more selection buttons selects (or deselects) the 
levels associated with the buttons. A marker appears in the right-most column of the 
display for selected levels.

When all levels are selected, pressing a level button turns them all off except the one 
pressed. 

If there are more than levels than buttons, scrolling is enabled. 

Deselecting virtual levels in X-Y mode prepares a breakaway.

Hold mode preserves the level selection after a take. 

MD Mode 

When the panel is in MD mode, a selection button represents an MD destination. If there 
are more MD destinations than selection buttons, scrolling is enabled. Pressing a selection 
button selects the destination.

Certain MD destinations might be unassigned. They appear blank in the display and 
the corresponding buttons are dark. 

When your panel is in hold mode, you can select more than one destination at once. If your 
panel is not in hold mode, MD destinations are mutually exclusive: you can select only one 
at a time.

Содержание NV9649








































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды