GRASS VALLEY NV9640, Руководство пользователя

Страница: 68 / 112

58
Operation
Operating Concepts
MD Mode
In MD mode, turning hold mode on allows you to select more than one destination button at a
time. When you select a source, the source applies to all selected (high-tally) destinations. If hold
is still on when you press ‘Take’, the selected destinations remain selected and the display
reflects the selected destinations. The buttons for the selected destinations remain high-tally.
Without hold enabled, the panel has no destinations selected after an MD take and the buttons
for the selected destinations go low-tally.
When hold is active, all selected MD destinations get the source you selected most recently (in
case you change your mind and selected another source).
X-Y Mode
In X-Y mode, the hold button causes breakaway levels to be retained after a take. The levels you
selected (and deselected) remain lit (or unlit) as they were before the take.
Information
The ‘Information’ button presents auxiliary information on the alphanumeric display. Such infor-
mation might be level-mapped sources.
The default button text is “Info” but the button can have any legend.
Level Map
The ‘Level Map’ button cross-connects levels (typically in the same physical router). The function
is typically used to shuffle audio channels, for example, to connect AES1/2 to AES3/4.
Follow these steps to create a level mapping:
1 Select a source. Here, the source is CAM-14:
2 Press ‘Level Map’. The button goes bright and the display tells you to “Select Source Level.”
Preset Status Level/Dest
X – Y –––––––– –––––––– HD X – Y –––––––– –––––––– HD
Dest CAM–14 CAM––1 SD Dest CAM–14 CAM––1 SD
VTR––1 CAM–14 CAM––1 AUDIO 1 VTR––1 CAM–14 CAM––1 AUDIO 1
CAM–14 CAM––1 AUDIO 2 CAM–14 CAM––1 AUDIO 2
CAM–14 CAM––1 AUDIO 3 CAM–14 CAM––1 AUDIO 3
CAM–14 CAM––1 AUDIO 4 CAM–14 CAM––1 AUDIO 4
–––––––– –––––––– TIMECODE –––––––– –––––––– TIMECODE
Page 1 Page 1
Preset Status Level/Dest
X – Y –––––––– –––––––– HD X – Y –––––––– –––––––– HD
Dest CAM–14 CAM––1 SD Dest CAM–14 CAM––1 SD
VTR––1 CAM–14 CAM––1 AUDIO 1 VTR––1 CAM–14 CAM––1 AUDIO 1
Select CAM–14 CAM––1 AUDIO 2 Select CAM–14 CAM––1 AUDIO 2
Source CAM–14 CAM––1 AUDIO 3 Source CAM–14 CAM––1 AUDIO 3
Level. CAM–14 CAM––1 AUDIO 4 Level. CAM–14 CAM––1 AUDIO 4
–––––––– –––––––– TIMECODE –––––––– –––––––– TIMECODE
Page 1 Page 1