GRASS VALLEY NV9605 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 75

background image

iv

Notices

immédiatement à l'eau savonneuse. Ne jamais ingérer le liquide. La toxicité est
extrêmement faible, mais la prudence demeure de mise en tout temps.

Recycling

Visit www.grassvalley.com for recycling information.

Certification and Compliance

Safety Compliance

This equipment complies with the requirements of CSA/UL/IEC/EN 60950-1, 2

nd

Ed. + AM1, Safety of information technology equipment.

The power cords supplied with this equipment meet the appropriate national
standards for the country of destination.

Electromagnetic Compatibility

This equipment has been tested for verification of compliance with FCC Part 15,
Subpart B requirements for class A digital devices.

This equipment has been tested and found to comply with the requirements of
the EMC directive 2004/108/EC:

• EN 55022 Class A Radiated and conducted emissions

• EN 61000-3-2 Limits for harmonic current emissions

• EN 61000-3-3 Limitation of voltage fluctuations and flicker

• EN 61000-4-2 Electrostatic discharge immunity

• EN 61000-4-3 Radiated, radio-frequency, electromagnetic field immunity

• EN 61000-4-4 Electrical fast transient immunity

• EN 61000-4-5 Surge transient immunity

• EN 61000-4-6 Conducted disturbances immunity

• EN 61000-4-8 Power frequency magnetic field immunity

• EN 61000-4-11 Voltage dips, short interruptions and voltage variations

immunity

Note:

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy, and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.

«
...
2
3
4
5
6
...
»

Содержание NV9605












































































Отзывы:

Нет отзывов

Похожие инструкции для NV9605

Бренд: Warren Controls Страницы: 28

Бренд: EAS Electric Страницы: 89

Бренд: National Instruments Страницы: 29

Бренд: Hanna Instruments Страницы: 88

Бренд: Eaton Страницы: 8

Бренд: WAREMA Страницы: 4

IntelliZone2 MasterStat

Бренд: Water Furnace Страницы: 44

Бренд: Ziton Страницы: 36

Бренд: Vizio Страницы: 65

Бренд: Measurement Computing Страницы: 32

Бренд: SOMFY Страницы: 112

Бренд: Hunter Страницы: 2

Бренд: Tektronix Страницы: 112

Бренд: Ros Страницы: 10

Бренд: Rain Bird Страницы: 48

Бренд: Sullair Страницы: 31

Home easy HE-440

Бренд: CH Byron Страницы: 2

Бренд: RTI Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды