manualshive.com logo in svg

GRASS VALLEY LDK 4000 ELITE -, Руководство пользователя

Поделиться
Скачать
GRASS VALLEY LDK 4000 ELITE - Скачать руководство пользователя страница 25

LDK 8000 Elite/4000 Elite System camera User’s Guide (v1.01)

25

Chapter 2 - Installation

2.4  AJ-MC700 Microphone

To attach the optional microphone to the camera proceed as follows:

1.

Open the microphone holder by unscrewing the knurled screw (2) of the microphone 
support bracket (1) on the viewfinder and open.

2.

Slide the microphone into the split tube until the microphone shoulder reaches the mark 
(5) in the tube.

3.

Place the tube with the microphone into the holder with the split facing upwards. Mount 
the microphone as straight as possible.

4.

Ensure that the rubber supports at the back and front of the holder fit into the rims (6) 
around the tube.

5.

Close the holder and tighten the knurled screw at the top. Don’t allow the wind hood to 
touch the holder (7) as this reduces the damping effect.

6.

Connect the microphone cable to the 

MIC

 audio connector (3) on the right side of the 

camera. To avoid mechanical pick-up, do not let the microphone cable touch the holder.

7.

Place the microphone cable into the top clip at the front of the camera and into clip (4) at 
the side of the camera. (Pull and twist clip to open it.)

Other microphones with a diameter of 21 mm can also be used, however, ensure that the 
sensitivity of the input that match that type of microphone are correctly selected in the camera 

INSTALL

 menu. When a longer microphone is used, it is not necessary to place it in the split 

tube. Phantom power is always present on the front microphone socket.

Figure 2-6. 

Microphone mounting

2

4

1

3

5

7

6

Содержание LDK 4000 ELITE -



























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды