GRASS VALLEY KARRERA, Руководство пользователя

Страница: 27 / 370

KARRERA — User Manual 27
Button Mapping
Local Panel Source Button Mapping
The Karrera Control Panels are considered local panels. Local panel button
mapping can be defined the same for all the banks at once, or you can select
individual local panel banks to map differently.
1.
Touch the labeled Bank button(s) of the banks you wish to map
(
Figure 8 ). You can select one, some, or all of the banks to be mapped.
Notice that a
Select All
button is available below the list of bank buttons.
2. Scroll the Button list in the central pane and touch the bank source
button to be mapped in the center pane.
3. Scroll the Sources list on the right and touch the desired Karrera source
in the right pane. As the mappings change, the names of the different
sources will appear on the source name displays on the Control Panel.
4.
Repeat Step 2 and Step 3 until all the bank buttons have been mapped.
Remote Aux Panel Source Button Mapping
Note Remote Aux Panels must be installed and configured before their buttons can
be mapped. Remote Aux Panels assigned to a control surface can only be
configured when the Menu Panel is accessing that control surface. See the
separate
Karrera Installation & Service Manual for Remote Aux Panel config-
uration procedures.