GRASS VALLEY KARRERA K-FRAME, Инструкция по установке и обслуживанию, Страница: 216 / 278

216 KARRERA K-FRAME — Installation & Service Manual
Section 6 — External Interfaces
Note If the K-Frame system has been configured with a router IP address but a
connection to the router has not been established, changing the IP address
in this menu will not make the K-Frame system immediately try to connect to
the new router address. The K-Frame system will automatically try to connect
after about 30 seconds using the entered router IP addresses.
Primary and Secondary Router Communications
The Karrera K-Frame system will initially use the primary router IP
address for communications. If the primary control system fails to respond,
the system will attempt to use the secondary IP address for router commu-
nications, and if successful will continue using it in the future. If communi-
cations then is lost to the secondary control system, the system will attempt
to reestablish communications with the primary router control system.
Defining Routed Sources Definition
The Eng Setup Source Definition menu is used to define routed Karrera K-
Frame sources, which includes specifying which router destination will be
associated with each switcher source.
1.
Press the
Eng Setup
Menu panel button, then touch the
Source Definition
category selection button, to go to this menu ( Figure 155 ).
Figure 155. Source Definition Menu