GRASS VALLEY KARRERA K-FRAME, Инструкция по установке и обслуживанию, Страница: 181 / 278

KARRERA K-FRAME — Installation & Service Manual 181
Multiple Suite Resource Sharing
To use different Panel Prefs for different control surfaces, create and save
each Panel Prefs file while logged into that suite and control surface. This
is necessary for button mappings on each suite’s control panel.
Delegate Stripes to MEs In Each Suite
You can now delegate the Control Panel Stripes to control the desired MEs
in each suite using the standard procedure:
1.
On a panel EMEM area, press
Menu
, and select
Stripe Deleg
(press
8
)
( Figure 130 ).
Figure 130. Accessing the Stripe Deleg Menu s
2.
The ME Stripe Delegation menu appears. Press the buttons below the
MEs indicated to allocate the top to bottom panel stripe to the indicated
ME (
Figure 131 ).
Figure 131. Delegating Suite Stripes to MEs
Multi Suite Independent Operation
Once configured with two suites, operators can work on each control
surface completely independently from one another. Coordination will be
required, however, to ensure the resources each operator needs are shared
as necessary.
Me Me nu
Pa us e Pa us e 9 Ba n k a n k
3 / 7
7 8 L rn
Menu 1
Trans
Rate
Stripe
Delg
Panel
Mem
Macro
8804_16
8804_17
Me Me nu
Pa us e Pa us e
Rev Rev
9
6
Ba n k a n k
3 / 7
Ba n k a n k
2 / 6
7
4
8
5
L rn
S eq
ME Stripe Delegation
ME1 ME2 ME3 ME4 PGM