GRASS VALLEY KARRERA K-FRAME, Инструкция по установке и обслуживанию, Страница: 180 / 278

180 KARRERA K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
4. Go to
Eng Setup
,
Eng Login
, and use the
Change Identity
button to login as
Suite 2 CS A
. Then touch
Eng Setup
,
Acquire Resources
and acquire the
resources needed in suite 2 that have been freed in suite 1 ( Figure 129 ).
Figure 129. Acquire Resources Menu, Suite 2
Save Default Multi-Suite Engineering Setups File
Save this Eng Setup configuration to disk, naming the file to identify it as
the default multi- suite engineering configuration for the facility.
Define and Save Default Suite Prefs
Define default Suite Preferences as appropriate for suite 1 and suite 2. This
is accomplished by logging in to each suite individually, accessing the
various configuration menus, setting the available parameters, and then
saving a Suite Prefs file for each suite while logged into that suite.
Define and Save Default Panel Prefs
Similar to Suite Prefs above, Panel Prefs files can be created and saved for
each control surface, if you wish. For engineering troubleshooting pur-
poses, you may be able to define and save a single Panel Prefs file for use
on any control surface.