GRASS VALLEY KALEIDO-IP X130, Инструкция по установке и обслуживанию, Страница: 77 / 124

77
Kaleido - IP X330/X130
Installation & Service Manual
cards listed below have been tested to work with the multiviewer and are supported by
Grass Valley.
Add-on cards must be installed in specific server card-slot locations. See Cabling Diagram , on
page 23.
The following table lists the SFP cartridges that can be installed in the field. Only the SFP
cartridges listed below have been tested to work with the multiviewer and are supported
by Grass Valley.
Kaleido - IP X330/X130 PCI network interface add-on card options
Part Number Option
To be Installed in Server
PCI Expansion Slot
Number
i
i. See also Cabling Diagram , on page 23.
Feature
KIP-OPT-ETH-1X Extra 1 × 100G
QSFP28 ports
1 or 2.
2 cards per multiviwer
maximum.
Single NIC card (40/50/100
Gb/s) for QSFP cartridges
ii
.
ii. Adds LAN5 and LAN6 to the multiviewer (if not already installed). The KIP-OPT-UCIP / KIP-OPT-
UCIP - OUT and Rivermax license option(s) are also required for any one of these cards to receive
SMPTE ST 2022-6 / SMPTE ST 2110 streams or send SMPTE ST 2110 streams (see the table Kaleido - IP
X330/X130 software options , on page 75).
Kaleido - IP X330/X130 SFP hardware options
Part Number Option Feature
Minimum
supported Kaleido
Software version
QSFP-40G-SR4 40 G pluggable optical
QSFP transceiver
40GBASE-SR4, 4 lanes, 850
nm MMF, 1x12 MPO
receptacle
11.2.0
QSFP-40G-ESR4 40 G pluggable optical
QSFP transceiver
40GBASE-SR4, 4 lanes, 850
nm MMF, 1x12 MPO
receptacle, extended
range
11.2.0
QSFP-CBL-1MM 40 G integrated active
optical cable
Multi-mode fiber QSFP+
1m cable length
11.2.0
QSFP-CBL-5MM 40 G integrated active
optical cable
Multi-mode fiber QSFP+
5m cable length
11.2.0
FGAN FCQ-100GE-
SR4
100 G pluggable
optical QSFP28
transceiver
Transceiver, 100GbE,
QSFP28, MPO, 850nm, SR4,
up to 100m
11.2.0