43
IQMIX25/40
User Manual
Sender TPG (Test Pattern Generator)
The
Sender TPG
page allows test patterns to be applied to senders on a spigot-by-spigot basis.
The page displays a pane for each spigot in use, as shown above; captions can be defined, TPG
enabled or disabled and audio configured for each. However, when spigots are linked, only the
Master spigot can be configured; the Slave spigots inherit their configuration from the Master,
and have their controls disabled.
Sender TPG
page Linked Spigot Display
The following options are available for each spigot:
If a test pattern is applied, either a pattern or a tone, the spigot cannot be used for streaming
any other essence.
Click
Show Caption
to overlay a caption on the video essence.
Sender TPG Page
Option
Operation
TPG
Select the test pattern to apply to the spigot from the
drop-down list.
Audio Freq
Select the audio frequency to apply to the spigot from the
drop-down list.
Caption
Type a caption (max 19 characters) to optionally be
displayed with the test pattern.
Audio dB
Select the dB level to apply to the spigot from the drop-
down list.
Show Caption
Enable the checkbox to display the caption with the test
pattern.
Audio Mute
Enable the checkbox to mute the audio tone.
Содержание IQMIX25 Series
