22
Fibre Channel Switch
16 April, 2003
Trap Severity Options
---------------------
unknown, emergency, alert, critical, error, warning, notify, info, debug, mark
Contact
(string, max=32 chars)
["On-call engineer"]
Location
(string, max=32 chars)
["Rack 3-B"]
Trap1Address
(dot-notated IP Address)
[192.168.217.5]
Trap1Port
(decimal value)
[162]
Trap1Severity
(see allowed options above)
[warning]
Trap1Enabled
(True / False)
[True]
Trap2Address
(dot-notated IP Address)
[192.168.216.48]
Trap2Port
(decimal value)
[162]
Trap2Severity
(see allowed options above)
[warning]
Trap2Enabled
(True / False)
[True]
Trap3Address
(dot-notated IP Address)
[0.0.0.0]
Trap3Port
(decimal value)
[162]
Trap3Severity
(see allowed options above)
[warning]
Trap3Enabled
(True / False)
[False]
Trap4Address
(dot-notated IP Address)
[0.0.0.0]
Trap4Port
(decimal value)
[162]
Trap4Severity
(see allowed options above)
[warning]
Trap4Enabled
(True / False)
[False]
Trap5Address
(dot-notated IP Address)
[0.0.0.0]
Trap5Port
(decimal value)
[162]
Trap5Severity
(see allowed options above)
[warning]
Trap5Enabled
(True / False)
[False]
ReadCommunity
(string, max=32 chars)
[public]
WriteCommunity
(string, max=32 chars)
[private]
TrapCommunity
(string, max=32 chars)
[public]
AuthFailureTrap
(True / False)
[False]
Do you want to save and activate this snmp setup? (y/n): [n] y
Your monitoring station should now receive all traps from your Fibre Channel switch.
You can test this by creating a fault condition, such as disconnecting one of your Fibre
Channel connections to the Fibre Channel switch. A message should appear in the
NetCentral manager.
