GRASS VALLEY FGAEY 1312 Скачать руководство пользователя страница 56

Страница: 56 / 71

MV-801 User Manual

Issue 1 Revision 1

Page 36

3.4.4 Module Fitting Procedure

Please ensure you have read

Fitting Preliminaries

, on page 34 before proceeding to fit

modules.

Go to the

rear of the router frame

The procedure continues with the fitting of rear modules:

Rear Slot (2):

Insert a1312 MV-800/MV-801 Rear Panel module into rear Slot (2). Check

the orientation of the rear module, see Figure 20.

Fasten the two rear panel module securing screws. Do not over-tighten them.

Rear Slot (3):

Fit a second 1312 Rear Panel module or a blanking plate (see Figure 21)

to rear Slot (3).



Fasten the two rear plate-securing screws. Gently tighten. Do not over-tighten.

IMPORTANT



Ensure the 1312 MV-800/MV-801 Rear Panel module is the correct way
up,



“INSERT THIS SIDE UP” label is printed on the top of the rear panel, see
Figure 20.

Figure 20 1312 Rear panel module, showing “INSERT THIS SIDE UP” label.

IMPORTANT



Do not over tighten the rear panel fastening screws.

•

They should screw in without any resistance until the screw head
secures the rear panel to the frame.

•

If a rear panel fastening screw binds up then it should be removed
and the screw and its alignment should be checked before the
screw is refitted.

IMPORTANT

The risk of non-compliance and overheating is with the user if blanking
plates are not fitted in unused rear slots.

INSERT THIS SIDE UP label

Содержание FGAEY 1312








































































Результаты поиска

Содержание FGAEY 1312

Отзывы:

GRASS VALLEY FGAEY 1312, Руководство пользователя, Страница: 56 / 71

Результаты поиска

Содержание FGAEY 1312

Отзывы: