GRASS VALLEY CopperHead 3050, Руководство пользователя

Страница: 38 / 93

32
Physical Installation
Mounting the CopperHead 3050 Camera Unit to the Camera
Mounting the CopperHead 3050 Camera Unit to the Camera
This example illustrates the mounting of an Anton-Bauer battery mount system, but your
system may differ. This case illustrates a configuration where the camera is powered locally
at the camera position either by battery or by a local power source. This assumes a tactical
fiber connection with no hybrid power on the cable.
Fig. 4-1: Mounting the CopperHead 3050 Camera Unit to the Camera
• Position your camera ( 1 ) so that you can easily access the battery mounting plate at the
rear of the camera. Ensure that the camera is well supported and stable. If a battery is
mounted, remove it and put it to one side.
• Attach the CopperHead 3050 Camera Unit ( 2 ) to the camera battery mounting plate.
The mounting is mechanically identical to attaching a battery. For instructions on how
to attach the required cables between the camera and the 3050 Camera Unit,see
Connections to the CopperHead 3050 Camera Unit on page 43.
• If you are powering the camera and 3050 Camera Unit by battery, mount the battery ( 3 )
to the CopperHead 3050 Camera Unit battery mounting plate ( 2 ) exactly as you would
mount the battery to your camera.
• If you are powering the camera and 3050 Camera Unit by local power supply, mount
the power supply (4-Pin) adaptor plate ( 4 ) to the CopperHead 3050 Camera Unit
battery mounting plate ( 2 ) exactly as you would mount a battery to your camera. You
will supply the external local power supply.
For configuration please see Connection of the System on page 35.
Battery or AC
Power Supply
Battery-to-4
pin adaptor
(such as A/B
SO23)