GRASS VALLEY CameraMan CPT-2018, Инструкция по установке и эксплуатации

Страница: 52 / 102

52 CameraMan Installation and Operation Manual
Appendix H — CPT 2018-A3D On-Screen Menus
Color Settings
Figure 31. Color Setting Submenu
Table 7. Color Settings
Chroma Level (-3 to +3) Chroma Level can be decreased or increased to three levels.
White Bal ATW: The white balance is automatically adjusted to the optimum position.
AWC A, AWC B: Color temperature conditions at two points can be stored at AWC A and AWC B.
Once the white balance is adjusted with the ITEM/AWC switch on the back of the camera, it is no
longer necessary to set the white balance again if you simply select AWC A or AWC B, provided that
the camera is used under the same conditions. Fine color adjustment can be made after setting AWC
by red/blue gain adjustment in Painting setting.
P SET 3200K: The white balance is adjusted to 3200K illumination.
P SET 5600K: The white balance is adjusted to 5600K illumination.
ATW Speed (SLOW 2, SLOW 1, MID, FAST 1, FAST 2) ATW Speed can be set.
Pedestal (-150 to +150) The black level (pedestal) of the luminance (Y) signal can be set. Used in adjusting
the black levels of two or more cameras.
Painting (-150 to +150)
R Gain, B Gain: Fine adjustment of the white balance can be made after AWC setting when AWC A or
AWC B is selected in White Balance Setting. The set value returns to 0 after AWC setting in using
the camera alone.
R Pedestal, B Pedestal: Fine adjustment of the black balance can be made after ABC setting. The set
value returns to 0 after ABC setting in using the camera alone.
Nega/Posi Posi: Normal image.
Nega: Image is shown reversed in darkness and color.
±
±