GRASS VALLEY ATP-2000, Руководство пользователя

Страница: 53 / 90

32
Operation
Generic Parameter Control Screen
Generic Parameter Control Screen
This section describes parameter change operations that can be done using a soft panel on
the ATP-2000 Advanced Touch Panel.

These are generic actions and are not specific to any card/device.

For parameter controls for specific cards, see the corresponding card documentation.
• Generic Parameter Control Operation
• Change Card Being Controlled
• Back to ‘Home’ Card or Card-Channel Main Screen
Generic Parameter Control Operation
A selected card will have certain functionality/status and may comprise one or more
channels of processing, from a functional control and monitoring perspective. This is
presented on a graphical
Parameter Control screen on the RHS of the Card Screen,
typically in the form of a block diagram. (Blocks are shown dimmer where parameters are
not controllable.)
Fig. 5-6: Example Card Parameter Control Screen - Main Menu Example for XIP Card Shown
1 Select the high-level parameter control screen for card or card-channel.

For example, ‘UDC 1’ . (See Figure 5-6.)
2 Select a card function to control. For example, ‘HDR Processing’ . (See Figure 5-6.)
Controls are presented for the selected function.

(See Figure 5-7 for an ‘HDR processing’ example.)
Note: Parameter control for any particular card/device is specific to that
card/device and for full instructions on how to change parameters for
a particular card etc., please see the corresponding card/device
documentation.
Card name : Frame : Slot number
Graphic block diagram representing controllable card or card-channel functionality.
RHS
Click to return to ‘home’ parameter control screen of the card or card-channel.
Select high-level parameter control screens
Indicates a
licensed feature