GRASS VALLEY 8960DEC -, Инструкция по эксплуатации

Страница: 11 / 42

8960DEC Instruction Manual 11
Power Up
Power Up
The front LED indicators and configuration switches are illustrated in
Figure 4 . Upon power-up, the green PWR LED should light and the yellow
CONF LED should illuminate for the duration of module initialization.
Operation Indicator LEDs
With factory default configuration and a valid input signal connected, the
green PWR LED and one of the green signal standard LEDs (525 or 625)
should illuminate (refer to
Table 2 on page 12 to see the possible operating
indicator combinations).
Video input presence is indicated by the 525 or 625 LED (indicating a
525-line or 625-line input signal has been detected). Line standard must be
set manually, there is no auto detection.
Figure 4. LEDs and Configuration Switches
16-position
Rotary switch
Momentary toggle switch
525 – Green LED on indicates 525-line input and reference are present
PWR – Green LED on indicates power OK
FAULT – Red LED is off during normal operation
Ejector Tab
AUTO – Disabled
625 – Green LED on indicates 625-line input and reference are present
Module Configuration Switches and LED
2ND LED
0543_06r1
0
1
2
3 4
5 6 7
8
9
A
B
CD
E
F
COMM – Yellow LED on indicates communication bus traffic
CONF – Yellow LED on indicates module is initiating, changing operating
mode, or updating firmware