Grason-Stadler gsi 39 Скачать руководство пользователя страница 97

Страница: 97 / 112

Page 97 of 112

Computer Interface

INTERFACE CONFIGURATION

The configuration of the GSI 39 computer interface must be set to match the interface configuration

of the computer. The GSI 39 defaults to 115 kBaud, no parity, 8 data bits, 2 stop bits and no

communications flow control. The default settings for the baud rate, parity, number of data bits and

flow control may be modified using the

Data Transfer Program Mode

explained earlier in this chapter.

CABLE CONNECTIONS

The computer interface provides a serial interface consisting of a USB connector.

GSI Suite

GSI Suite is a data management software program that is designed to store audiologic data and

generate electronic copies of results for attaching to the medical record. Electronic formats include

PDF, TIFF, JPEG, and XPS. It may be used as a standalone software package or as part of a networked

solution when paired with OtoAccess or NOAH 4.

The GSI Suite Audiometric Data Management software is compatible with the GSI 39. Data transferred

from the GSI 39 includes the following: tympanometric tracings and numeric data, reflex screening

results and audiometric thresholds (air conduction, unmasked) depending on the configuration of the

GSI 39. New test results obtained with GSI 39 instruments can only be transferred, viewed, and saved

within GSI Suite if they are connected to a computer. Previously stored data may be viewed for

evaluation or comparison without a connection to the GSI 39 instrument. Review the GSI Suite User

manual for a complete description of the computer requirements, set up, installation and features of

the software.

GSI SUITE INTERFACE CONFIGURATION

After configuring the GSI 39 computer interface and connecting the USB cable, install the GSI Suite

as per the instructions provided with the GSI Suite software. Connect the USB cable between the

computer and the GSI 39. Run the GSI Suite software and configure the software for connection

with the GSI 39.

Suite Settings

Configure

General Tab

Connected Devices

•

Audiometry

•

Tympanometry

Restart GSI Suite to use the new configuration for the GSI 39.

Содержание gsi 39

















































































































Результаты поиска

Содержание gsi 39

Отзывы:

Grason-Stadler gsi 39, Руководство пользователя, Страница: 97 / 112

Результаты поиска

Содержание gsi 39

Отзывы: