2. Setup: How to Make the Settings
1. Press the MENU key to display the setup menu screen.
2. Select "1V" for the Range parameter for CH 1 and CH 2.
3. Select "Off" for all the other channels.
(1)Using the procedure described above, select "Off" for CH 3 to CH 8.
Basic Setup Menu Operation
l
Examples of selection menu operations (AMP screen)
10
Make the settings required for data capture. Here we will make only those settings that are
absolutely necessary. The other settings will be left as the default settings (the settings made
prior to shipment from the factory)
The keys used on the menu screens are the keys, the ENTER key, and the QUIT
key. The current cursor position is displayed in blue. Use the keys to move the cursor.
If you press the ENTER key at the cursor position, a selection menu or a box for inputting
numeric values and so forth is displayed. If you press the QUIT key, the screen closes and
the settings are canceled.
1. Use the keys to move the
cursor to the Input parameter
opposite CH 1 and then press the
ENTER key.
2.A selection menu is displayed
when the ENTER key is pressed.
Use the and keys to select
"TEMP."
3. Press the ENTER key to confirm
your selection.
(Note: Select "DC" for voltage measurement, and "Humidity" for humidity measurement.)
(1)Move the cursor to the Range parameter opposite CH 1 and select "1V".
(2)Make the same setting for CH2.
Points to
Remember !
GL900-Quick-E.indd 11
08.5.15 3:27:47 PM