GRAPHTEC GL820 Скачать руководство пользователя страница 6

Страница: 6 / 22

GL820 Descriptions of the Control Panel Keys

SPAN/POSI/TRACE

CH GROUP

TIME/DIV

Press the TIME/DIV key to change the time axis display range on the waveform screen.

This key enables SPAN, POSITION, and TRACE settings to be made independently for

each channel. Each time this key is pressed, the display mode changes in the sequence

shown below. Use the and keys to select the

channel, and the and keys to change the setting values.

Press this key to switch to the next group consisting of 10 channels.

Press the side to switch to the previous group.

Press the side to switch to the following group.

(2) SPAN/POSI/TRACE

(1) CH GROUP

(3) TIME/DIV

(4) MENU

(5) QUIT

(6) DIRECTION KEYS

+ + ENTER

Password setting

(7) ENTER

(8)

FAST FORWARD

(KEY LOCK)

(9) START/STOP

(USB DRIVE MODE)

(10) REVIEW

(11) DISPLAY

(12) CURSOR

(ALARM CLEAR)

(13) FILE

(14) NAVI

MONITOR

SPAN

POSITION

TRACE

Displays digital values (default).

Used to change span settings (change the waveform amplitude).

Used to change position settings (adjust the upper and lower values

of the waveform).
Used to change trace settings

(set the waveform display to On or Off).

Note: If the QUIT key is pressed when the GL820 is in the SPAN, POSITION,

or TRACE mode, the display returns to MONITOR mode.

Содержание GL820























Результаты поиска

Содержание GL820

Отзывы:

Похожие инструкции для GL820

Бренды по названию

Популярные бренды

GRAPHTEC GL820, Быстрый старт

Результаты поиска

Содержание GL820

Отзывы:

Похожие инструкции для GL820

Бренды по названию

Популярные бренды