GRANULDISK GRANULE SMART Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 59

GRANULDISK GRANULE SMART Скачать руководство пользователя страница 28

2.4 Start and operation

Fig. 21 When the program is finished

the green light goes on.

44 When the wash program is

complete, the word ”END”

flashes and the green indica-

tion lamp goes on.

65°C

85°C

END

When the program

is finished the green light

55 When the door are opened the display goes back into stand-by mode

and shows the latest program used.

Eco program
with granules
Wash time: 2:10

66 Keep the door closed if you are not running another wash program

straight away. It saves energy and reduces evaporation from the wash

tank.

Stopping the machine while in operation

• Switch to washing with water for about 30 seconds in order to rinse off

all Granules. Then press STOP (2).

• In an emergency: Just press STOP (2).

NOTE

Utensils may have remains of detergent and should be

washed again before they are taken out of the machine.

Never drain an emergency stopped machine! (Granules

left in the pump without water will jam the pump impeller.)

WARNING

Do not open the door during a wash cycle! Risk of burn.

Resetting of overheat protection

Reset overheat protection if error codes 104 and 105 occur.
11 Empty the wash tank.

28

Rev. 2021-09

«
...
26
27
28
29
30
...
»

Содержание GRANULE SMART




























































Отзывы:

Нет отзывов