Grant Instruments
30641 V1.3
Yoyolog
Page 7
Operating Manual
4
General information
The yoyo
log
series consists of a large variety of loggers:
Some have an internal sensor only. Others have inputs for external sensors, whilst
some have both sensor types.
A full list of models can be found on our website.
The logger uses sensor inputs to which external sensors are connected. Some of the
sensors are combined sensors, such as the YS-RHT for measuring temperature and
humidity. This sensor uses a single input connector.
The loggers have a memory capacity for 100,000 readings which can optionally be
extended to 4,000,000 readings.
Logging can be set to either “stop-when-full” or” ring-buffer mode” (continuous mode).
The device can be controlled over the USB interface using YoyoView Software. It only
a few clicks to select the relevant parameters
