Grant AS 1.0, Инструкция по установке и эксплуатации, Страница: 8 / 20

In
st
al
la
ti
o
n
8
4 Installation
continued...
WARNING:
The inverter must not be
installed on a flamable
surface, due to risk of
fire!
4.2 Mounting
Using the two holes on the mounting
bracket as a guide, mark and drill two
12mm holes.
Assemble the expansion bolt set as
shown in Figure 2, and secure the
mounting plate to the wall.
Lift the inverter (with two people) and
hang on the top edge of the mounting
plate.
Fix the positioning bolt to the bottom
hole of the mounting bracket.
Fasten the positioning bolt under the
inverter. See Figure 3
1) Mounting Bracket
2) Nut
3) Spring washer
4) Flat washer
5) Expansion tube
6) Bolt
Figure 2: Bolt Assembly
Figure 3: Bolt Positioning