Page 8
Dia.11
Dia.12
Dia.13
Dia.15
Dia.16
Dia.17
Dia.18
Dia.19
Dia.14
NOTE
Operating mode needs to be set to allow
programmed times to function
3. Press ‘TIME’ button then the icon ‘MON’ will be flashing (Dia.12).
4. Use ‘+’ or ‘-’ button to select ‘TUE’, then press ‘TIME’ button twice
to copy the data. The display will show: (Dia.13).
Modifying or adding new programmes
1. Press ‘PROG’ button and hold for approx 2 seconds, the display
will show: (Dia.14).
2. Use ‘+’ or ‘-’ button to select the day grouping which requires
modifying or a new day grouping for a new programme.
3. For modification press ‘PROG’ repeatedly to arrive at the pro-
gramme time requiring modification then use ‘+’ or ‘-’ button to
make the change. Press ‘PROG’ repeatedly again to arrive at the
next time requiring modification and use ‘+’ or ‘-’ button to make the
change.
Operating mode
1. Use’+’ button to set the output mode.
ON
- Output to permanently ON and omit the program (Dia.15).
OFF
- Output to permanently OFF and omit the program (Dia.16).
ON AUTO
- Output to ON until next program OFF period (Dia.17).
OFF AUTO
- Output to OFF until next program ON period (Dia.18).
One and two hour boost
1. Pressing ‘-’ (Boost) once in normal operating mode turns on for 1
hour period (Dia.19).
User Instructions
