Operating Instructions
7306020
10
Battery level indicator LED on the unit
1. The unit has a 3-stage green LED to indicate the remaining battery capacity when the trigger
button is pressed: The LEDs will then light up for 3 seconds. (pressing the release button down will
display the battery capacity status again).
2. If LED 1 flashes 3 times, this means that the battery pack needs to be charged.
3. Overtemperature protection: If the 3 LEDs of the battery level indicator flash 3 times together,
this means that the battery has overheated.
4.3
The LED light on the charger
Switch on (green light flashes slowly)
Battery is low (red light is on continuously)
Battery is charged 80% (green light flashes quickly)
Battery is charged 100% (green light is on permanently)
The temperature of the battery pack is too hot or too cold (red light flashes slowly)
Battery pack malfunction (red and green light are on continuously)
The charger may only be connected to a socket with 100-240 V
alternating current.
If the battery pack is too hot or too cold, the charger cannot charge the battery pack quickly
and the red indicator light flashes. When the battery pack temperature returns to between
0°C (32°F) and 50°C (122°F), the charger will automatically begin charging.
If both the red and green indicator lights signal “ON”, the battery pack either does not meet
the requirements or is defective. Please contact your specialist dealer.
Battery level indicator LED
RC status
LED 1 (green)
0%-33%
LED 1, 2 (green)
34%-66%
LED 1, 2, 3 (green)
67%-100%
LED 3 2 1
