GrandVision EZshot E610, Руководство пользователя

Страница: 12 / 39

11
After each photo is shot (when the camera returns to icon mode) the numbers of photos left to shoot at
this resolution is displayed on the top left of the LCD screen.
When the camera's memory (photo capacity) is full, the LCD screen will display a message - “Memory
Full insert an SD Memory Card to Transfer and Take More Than Two Test Photos”. If you attempt to take
a photo when the memory is full, the camera will sound continuous beeps.
Normal/Macro Shots
The camera has the function that captures objects at very near distance or very far distance per your
request.
Macro shooting: slide the Normal/ Macro switch to position which is on the camera. The icon
will appear on the LCD screen, indicating that the macro shooting is on.
Far shooting: slide the Normal/ Macro switch to
position which is on the camera. The icon will
appear on the LCD screen, indicating that the normal shooting is on.
Digital Zoom function
You can magnify your subject up to 4 times using the digital zoom. Use the T and W buttons to adjust
the zoom. The icon will show on your LCD screen. Press the T button to zoom in on your subject.
Push the W button to zoom back out.
Flash
In low light conditions it is best to use the built-in flash. You can also use the flash to compensate for
backlight conditions.
To set the flash:
Note: please move the Normal/ Macro switch to before using the flash function. The flash cannot be
activated while in macro mode.
Press the Up button repeatedly until the
icon shows on the LCD screen. This will activate the
automatic flash.
Press the Up button repeatedly until the icon appears on the LCD screen. This means the flash
function has been "forced on" (manual flash). If the flash is not ready, a LED will light up and the
icon