Casing
Buckle
Brake
Mechanism
Brake Mechanism
Hanging Piece
Step 3
Cable
Secure
positioning piece
Please secure your safety
limit lug at least 10mm
above the new limit
Up for cable
Down for cable
Screen Limit Settings
The screen is fitted with two limits. The limits
automatically stop the screen in the fully Up (top limit)
and fully Down (bottom limit) positions. You can adjust
the bottom limit to set your viewing height.
Setting The Bottom Limit
Caution: Setting the bottom limit beyond the black
leader may render your screen inoperable and void
your warranty
The bottom limit switch is accessible through a
grommeted hole at the back of the left side casing.
Lower the screen to the operating position then
insert the supplied Allen key into the white coloured
screw. Turn it clockwise to raise the screen or turn
it anti-clockwise to lower the screen.
When lowering the bottom limit the screen will move as
you adjust it.
When raising the bottom limit please lift and lower the
screen with the remote to see the new position.
Insert the cable box plug and attach break mechanism
.
Using RF Remote
Your remote control comes with batteries installed.
To operate your remote:
Press to lift the screen
Press to stop the screen
Press to lower the screen
The Micro switch
is used for retracting or
lowering cable.
UP for screen fabric
Down for screen fabric
Down for cable
Up for cable
STOP for fabric & cable
Plug the power cord into the Cable Box.
Step 4
Cable
Box
Socket on
Cable Box
Ceiling
Plug Socket
Plug
Plug the power cord into the Cable Box.
Step 4
Cable
Box
Socket on
Cable Box
Ceiling
Plug Socket
Plug
Mount the break
mechanism and screen
as shown below.
Step 2
Step 1
Carefully unpack the
screen. Securely attach the
cable box to the ceiling.
To the Owner:
Congratulations on purchasing a Grandview Sky-Show.
Important Notes:
•
Please read this instruction manual before use.
•
Please do not attempt to adjust or repair
the product. You will void the warranty.
•
Please retain this instruction manual for
future reference.
•
Handle the screen carefully during transportation.
• To ensure long lasting viewing enjoyment, always keep
the screen rolled up when not in use.
Warning
•
Ensure the screen is hung by the looped
suspension cables.
•
The screen must be securely mounted before being
operated. Failure to comply can cause the suspension
cables to unravel resulting in the cables being tangled
and possible screen damage occurring.
•
When suspending the screen under load-bearing
support, ensure the screen is hung level/straight.
•
Damage caused to the product due to incorrect
installation, suspension or operation is not covered
by warranty.
Supplied
Cable Box
Power cord
Multimedia
Cable Box
Cable Lock
Allen Key
RF Remote
Brake Mechanism
Operational Instructions
Cable Limit Settings
(The limits are preset at min 300mm and max 4950mm)
• Turn the remote control over to locate the
“Programming Mode” activation toggle switch.
• Press with a fine tip and the LED should light up,
indicating “Programming Mode” is on.
• Press the micro “UP/DOWN” buttons to move the
screen case to the required position. Press the
STOP button when the desired limit is achieved.
• Press the Programming Mode toggle switch again to
switch off programming mode and set the new limit.
