3
8
4. When mounting the screen onto Floating wall brackets, make sure the Up groove and the Down groove on the
housing match with the Up buckle and the Down buckle on the bracket seperately. ( Figure 8-9 ).
5. Fasten the Fixing screw on the bracket, to fix housing tightly onto the brackets.( Figure 10-11 )
3. Loose the Fixing screw to lower down the Baffle all the way. ( Figure 6-7 )
Figure 6
Figure 7
How to adjust tension situation of the string
If the string is loose which is caused by bump on transportation or faulty operation (Figure 30), please rotate the
String Adjustment Knob clockwisely to make string tensional (Figure 31). If the string is over-tensional, please press
the String Releasing Button and then rotate the String Adjustment Knob counter-clockwisely to suitable tensional
situation (Figure 32).
String Adjustment Knob
String Releasing
Button
Drop Limit
Retraction Limit
Figure 30
Figure 31
Figure 32
Baffle
Fixing screw
Up groove
Down groove
Figure 8
Figure 9
Figure 10
Figure 11
Attention:
> Please make sure there is no dust or dirt on the fabric surface before rolling it back to the casing
> The recommened working time is less than 50 seconds. The motor will enter overheating protection
status and stop working for every continuous 4 minuters operation, user would need to wait for a
while until the motor cool down before operating again.
> There is no lube needed for the motor. Please be noticed that the appropriate setting is optimized
which requires no further adjustment, please consult the after sales team before adjusting the limits.
