background image

1

Product Specifications

14

(1) For adjusting the viewing area, please insert the adjustment to regulate adjustment hole. A 

clockwise adjustment will increase the viewing area for about 13mm.

Note: After pressing the up button, you will need a few seconds to see the adjustment of screen; 

and after pressing the  down  button, you will see the position changed of screen.

Please do not operate the following step before step1 to avoid damages of screen.

(2) A counterclockwise cycle can adjust the distance to 13mm between casing and rod.

Please be careful while operating, too much retracting will cause the damages of screen and motor.

Note: 
1. Due to product updates, sizes and specifications are subject to change at any time.  
The tolerance for L is approximately 

±

 5mm (3/16 inches).

2. Actual dimension is measured by: total screen length L x end cap depth x end cap height.

B1

B

2

H

W

170

A

B

3

L

1

6

1

B1

Caution

    by inappropriate installation or operation.
2

Please keep the screen away from hot sources, such as radiator, heating machine, fireplace, 

    loudspeaker or other relative device.
3

 Only Plug with ground wire is acceptable.

4

Only accessories from authorized supplier is acceptable.

5

Please unplug the power wire when lighting and raining or not use with a long time.

6

Please handle the repair work to the professional agent.

7

Please prevent screen from wet and water .

8

As soon as the plug of the screen is connected to the power source, the screen is connecting

    with electricity.
9

Please use the approved power line (three-core power line)/ device interface/power plug.

10

Please use the rating (voltage, amps) power line (three-core power line) / device interface/power 

      plug. If have any questions about power line/ device interface/power plug, please contact the 
      professional people.
11

After installation, please locate a power device in order to disconnect power or connect the power 

      plug to electrical socket. This electrical socket should be installed to a convenient position. If the 
      accident occurs during operation, please disconnect power or take out the power plug.
12

The ceiling or wall used for fixture installation must be secure enough; load-bearing requirement 

       must be 4 times of the screen to prevent the screens from falling.

1.

 

Please read carefully with this instructions before installation to avoid damage to product causing 

Warnings: 

Please prevent screen from wet place to avoid electric or fire dangerous.

Warnings

To prevent from electric 
dangerous, please don't 
remove the end cap. There 
is no need for users to 
check the parts inside, 
please handle the problems 
to professional repairman.

Please notice the non-insulated voltage of the 

spare parts to prevent from electric dangerous.

Please operate according to the user manual 

with the screen.

B1

B2

B3

CB-MIRC72

CB-MIRC84

CB-MIRC100

CB-MIRC120

CB-MIRC150

CB-MIRC180

CB-MIRC200

CB-MIRC240

CB-MIRC77

CB-MIRC80

CB-MIRC92

CB-MIRC100

CB-MIRC106

CB-MIRC120

CB-MIRC150

CB-MIRC180

CB-MIRC200

72

84

100

120

150

180

200

240

77

80

92

100

106

120

150

180

200

20.0/23.0

24.0/27.2

26.6/30.2

29.3/33.4

35.4/40.2

46.2/51.8

50.5/56.8

59.6/66.8

24.5/27.8

24.7/28.0

27.0/30.5

28.2/32.0

29.2/33.0

31.6/36.0

41.2/46.5

48.5/54.5

52.8/59.5

1463x1097

1707x1280

2032x1524

2438x1829

3048x2286

3658x2743

4064x3048

4877x3658

1705x  959

1771x  996

2037x1146

2214x1245

2347x1320

2657x1494

3321x1868

3985x2241

4428x2491

1847

2131

2456

2862

3472

4147

4553

5366

2129

2151

2461

2638

2771

3081

3750

4474

4917

2158

2161

2155

2160

2607

3064

3369

3979

2160

2157

2157

2156

2161

2155

2409

2782

3032

30

50

50

50

50

80

80

80

50

28

50

50

50

50

50

80

80

50

50

50

50

80

80

80

80

50

50

50

50

50

50

80

80

80

850

670

420

120

80

80

80

80

990

950

800

700

630

450

300

300

300

1913x260x226

2197x260x226

2522x260x226

2928x260x226

3538x260x226

4213x260x226

4619x260x226

5432x260x226

2195x260x226

2217x260x226

2527x260x226

2704x260x226

2837x260x226

3147x260x226

3816x260x226

4540x260x226

4983x260x226

Содержание CB-MIRC









Отзывы: