4. Installation
5. Connector and Button
1.
VIDEO IN
:
Connect to VIDEO OUT of video source (e.g. VCR, V8
or TV GAME)
2.
S-VIDEO IN
:
Connect to S-VIDEO OUT of video source
3.
VGA IN
:
Connect to VGA card with supplied VGA cable
4.
VGA OUT
:
Connect to your original VGA monitor
5.
LINE IN
:
Stereo audio signal input, connect to AUDIO OUT of
audio source (e.g. VCR, V8 or TV GAME)
6.
SPK
:
Stereo power amplifier output, connect 4 to 8 ohms
impedance speaker.
7.
DC IN
:
Connect to supplied AC adapter.
8.
PC/AV
:
Input source selection button, switch among VGA IN,
VIDEO IN and S-VIDEO IN.
9.
IR
:
Infrared input of remote controller
6. Remote controller
1.
PC
:
Switch to VGA IN
2.
VIDEO
:
Switch to VIDEO IN
3.
SVIDEO
:
Switch to S-VIDEO IN
4.
OSD
:
On screen display button, display input signal status.
5.
BRITE.
:
Brightness adjustment. Press this button then press “+”
or “-“ can increment or decrement the brightness level.
6.
CONT.
:
Contrast adjustment. Press this button then press “+” or
“–“ can increment or decrement contrast level.
7.
COLOR
:
Color adjustment. Press this button then press “+” or
“–“ can increment or decrement the color level.
8.
HUE
:
Hue adjustment. Press this button then press “+” or
“–“ can increment or decrement the hue level.
9.
SYSTEM
:
Video system selection button, press this button to
select one of PAL BGHI/NTSC M,
NSTC4.43(50Hz)/PAL4.43(60Hz),
PAL N/NTSC4.43(60Hz), NTSC N/PAL M or
SECAM/PAL4.43(60Hz)
10. RECALL
:
Reset the brightness, contrast, color and hue to factory
default setting.
VGA
MONITOR
PC
VCR
LD
TV GAME
VGA IN
VGA OUT
DC IN
LIN IN
SPK
S-VIDEO IN VIDEO IN
VIDEO
CABLE
AUDIO
CABLE
SPEAKER
Ac Adapter
VGA Cable
