Grandstream Networks UCM6510, Руководство пользователя

Страница: 158 / 483

P a g e | 157
UCM6510 IP PBX User Manual
Version 1.0.20.31
Ring Simultaneously
Enable this option to have an external number ring simultaneously along
with the extension.
If a register trunk is used for outbound, the register number will be used to
be displayed for the external number as caller ID number.
External Number
Set the external number to be rang
simultaneously. ‘-’ is the connection
character which will be ignored.
Time Condition for Ring
Simultaneously
Ring the external number simultaneously along with the extension on the
basis of this time condition.
Hotline
Enable Hotline
If enabled, hotline dialing plan will be activated, a pre-configured number
will be used based on the selected Hotline Type.
Hotline Number Configure the Hotline Number
Hotline Type
Configure the Hotline Type:

Immediate Hotline: When the phone is off-hook, UCM6510 will
immediately dial the preset number

Delay Hotline: When the phone is off-hook, if there is no dialing within
5 seconds, UCM6510 will dial the preset number.
Other Settings
Ring Timeout
Configure the number of seconds to ring the user before the call is
forwarded to voicemail (voicemail is enabled) or hang up (voicemail is
disabled). If not specified, the default ring timeout is 60 seconds on the
UCM6510, which can be configured in the global ring timeout setting under
Web GUI

PBX Settings

General Settings : General Preference. The
valid range is between 5 seconds and 600 seconds.
Note :
If the end point also has a ring timeout configured, the actual ring timeout
used is the shortest time set by either device.
Auto Record
Enable automatic recording for the calls using this extension. The default
setting is disabled. The recording files can be accessed under Web
GUI

CDR

Recording Files .
Skip Trunk Auth

If set to
“Yes”, users can skip entering the password when making
outbound calls.

If set to
“By Time”, users can skip entering the password when making
outbound calls during the selected time condition.

If set to
“No”, users will be asked to enter the password when making
outbound calls.