manualshive.com logo in svg

Grandstream Networks HandyTone-496, Руководство пользователя

Поделиться
Скачать
Grandstream Networks HandyTone-496 Скачать руководство пользователя страница 25

HandTone-496 User Manual 

Grandstream Networks, Inc. 

 

25 

TFTP Upgrade 
Server 

This is the IP address of the configured TFTP server. If it is non-zero or not 
blank, the HandyTone ATA will attempt to retrieve new configuration file or 
new code image from the specified TFTP server at boot time. It will make up to 
3 attempts before timeout and then it will start the boot process using the 
existing code image in the Flash memory. If a TFTP server is configured and a 
new code image is retrieved, the new downloaded image will be verified and 
then saved into the Flash memory. 

HTTP Upgrade 
Server 

The URL for the HTTP server used for firmware upgrade and configuration via 
HTTP.  For example, 

http://provisioning.mycompany.com:6688/Grandstream/1.0.5.16

 

Here “:6688” is the specific TCP port that the HTTP server is listening at, it can 
be omitted if using default port 80. 
Note:  Auto Upgrade has to be set to Yes to enable HTTP upgrade. 

Auto Upgrade 

Choose Yes to enable HTTP upgrade and provisioning. 
In “Check for new firmware every” field, enter the number of days to check the 
HTTP server for firmware upgrade or configuration. 

Subscribe for MWI: 

Default is No. When set to “Yes” a SUBSCRIBE for Message Waiting 
Indication will be sent periodically. 

Offhook  
Auto-Dial 

This parameter allows users to configure a User ID or extension number to be 
automatically dialed upon offhook. Please note that only the user part of a SIP 
address needs to be entered here. The HandyTone ATA will automatically 
append the “@” and the host portion of the corresponding SIP address.  

Send Flash Event 

This parameter allows users to control whether to send an SIP NOTIFY 
message indicating the Flash event, or just to switch to the voice channel when 
users press the Flash key.  

FXS Impedance 

Selects the impedance of the analog telephone connected to the Phone port.  

Caller ID Scheme 

• Bellcore (North America) 
• ETSI-FSK (France, Germany, Norway, Taiwan, UK-CCA) 
• ETSI-DTMF (Finland, Sweden) 
• DTMF (Denmark) 

Disable Call 
Waiting 

Default is No. 

Polarity Reversal 

Default is No. If set to Yes, polarity will be reversed upon call establishment 
and termination. 

NTP server 

This parameter defines the URI or IP address of the NTP server which is used 
by the HandyTone ATA to display the current date/time. 

Содержание HandyTone-496
































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды