HandyTone-486 User Manual
Grandstream Networks, Inc.
16
by accessing the configuration via LAN port. With the WAN side HTTP access enabled, then get
the WAN IP address of the HandyTone-486 through section 5.1 with menu option 02. The
HandyTone-486’s Web Configuration page can be accessed by the following URI via WAN port:
http://HandyTone-IP-Address
where the
HandyTone-IP-Address
is the WAN IP address of the HandyTone-486.
NOTE:
•
To type IP address into browser to get into the configuration page, please strip out the leading
“0”s as the browser will parse in octet. e.g.: if the IP address is: 192.168.001.014, please type
in: 192.168.1.14.
6.2.2
End User Configuration
Once this request is entered and sent from a Web browser, the HandyTone-486 will respond with the
following login screen:
Grandstream Device Configuration
Password
Login
All Rights Reserved Grandstream Networks, Inc. 2005
The password is case sensitive with a maximum length of 25 characters. The factory default password
for End User and administrator is “123” and “admin” respectively. Only administrator can get access
to “ADVANCED SETTINGS” configuration page.
NOTE:
•
If you can not log into the configuration page by using the default password, please check with
your VoIP service provider. Most likely, the service provider has provisioned the device and
configured for you and changed the default password.
After the correct password is entered into the login screen, the embedded Web server inside the device
will respond with the following BASIC SETTINGS configuration page:
Grandstream Device Configuration
