Grandstream Networks, Inc.
GXV3175 USER MANUAL
Page 37 of 68
FIRMWARE VERSION 1.0.0.32
Updated : 11/2010
“Scan” to scan for the available wireless network and add it. Users
can also press “Add” to add the ESSID directly.
Security Mode
This parameter defines the security mode used for the wireless
network. The following are supported: WEP/Shared, WEP/OPEN,
WPA PSK TKIP, WPA PSK AES, WPA2 PSK TKIP, WPA2 PSK AES.
The default setting is set to “Disabled”.
Users will need to enter the corresponding authentication password
for the security mode.
Maintenance/Time Settings
NTP Server
This parameter defines the URL or IP address of the NTP (Network
Time Protocol) server. The GXV3175 phone may obtain the date and
time from the server.
The default setting is ntp.ipvideotalk.com.
DHCP Option 42
override NTP server
Select Yes for the user to allow DHCP Option 2 to override the NTP
server if there is one on the LAN. The default setting is NO.
Time Zone
This parameter controls the date/time display according to the
specified time zone.
Time Display Format
This parameter sets time display format to 12 Hour or 24 Hour
Date Display Format
This parameter sets date display format to YY-MM-DD or MM-DD-YY
or DD-MM-YY.
Self-Defined Time Zone
This parameter allows the users to define their own time zone.
Syntax:
std offset dst [offset], start [/time], end [/time]
Default is set to:
MTZ+6MDT+5,M3.2.0,M11.1.0, MTZ+6MDT+5
This indicates a time zone with 6 hours offset with 1 hour ahead
which is U.S central time. If it is positive (+) if the local time zone is
west of the Prime Meridian (A.K.A: International or Greenwich
Meridian) and negative (-) if it is east.
M3.2.0,M11.1.0
The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)
The 2nd number indicates the nth iteration of the weekday: (1st
Sunday, 3rd Tuesday…)
The 3rd number indicates weekday: 0,1,2,..,6( for Sun, Mon,
Tues,..,Sat)
Therefore, this example is the DST which starts from the second
Sunday of March to the 1st Sunday of November.
Maintenance/Web and Telnet Access
Disable Telnet
The default value is No. If set to YES, the GXV3175 will not allow any
telnet access to the phone.
Access Method
This defines the access method for web access: HTTP or secure
HTTPS protocol.
Port
This defines the port for web access. By default, HTTP uses port 80
and HTTPS uses port 443. This field is for customizable web ports.
Admin Password
This defines the administrator password for web interface access.
Only the administrator can configure the “Advanced Settings” and
“Account x” pages. The password is case sensitive and the maximum
