GXE 502X Quick Start Guide
10/25/07
Page 8
SIX: Configuring PSTN Lines (if available)
1.
Click on TRUNK/Phone Lines on the left menu bar to load the Internal PSTN
Trunk Line configuration page (See Figure 6-1).
2.
All sections on this page except for the Line Call Control section are used to
match the settings of the GXE to the local PSTN line parameters. The
default settings should work in most cases; you may check with your PSTN
service provider if your line parameters differ so that these settings may be
adjusted accordingly.
3.
Scroll down to the bottom of the page to view the “Line Call Control”
Settings (Figure 6-2). To direct all incoming PSTN calls on all lines to an
operator, for example, first enter “1-8” in the Line field.
4.
In the Inbound Call Answer drop-down box, choose “Direct Extension.” In
the drop-down box to the right, choose the extension number of the
operator.
Figure 6-1
5.
Set the Dial Prefix field to the prefix used to for outgoing PSTN calls; for
example, “9” is commonly used.
Note: This section is very important as it configures how all incoming calls are
handled on the FXO lines. For example you could have all incoming calls go to the
auto-attendant for one line and add a dial pre-fix for another.
Figure 6-2
