Grandstream Networks GWN7000 Скачать руководство пользователя

Страница: 61 / 155

P a g e

GWN7000 User Manual

Version 1.0.6.28

Client Bridge Support

Configures the client bridge support to allow the access point to be

configured as a client for bridging wired only clients wirelessly to the

network. When an access point is configured in this way, it will share the

WiFi connection to the LAN ports transparently. Once a SSID has a Client

Bridge Support enabled, the AP adopted in this SSID can be turned in to

Bridge Client mode by click the Bridge button.

RADIUS Sever Address

Configures RADIUS authentication server address.

RADIUS Server Port

Configures RADIUS Server Listening port (default is: 1812).

RADIUS Server Secret

Enter the secret password for client authentication with RADIUS server.

RADIUS Accounting Server

Configures the address for the RADIUS accounting server.

RADIUS Accounting Server

Port

Configures RADIUS accounting server listening port (defaults to 1813).

RADIUS Accounting Server

Secret

Enter the secret password for client authentication with RADIUS

accounting server.

Client Time Policy

Select a time policy to be applied to all clients connected to this SSID.

Use MAC Filtering

Choose Blacklist/Whitelist to specify MAC addresses to be

excluded/included from connecting to the zone’s Wi-Fi. Default is

Disabled.

Client Isolation

Client isolation feature blocks any TCP/IP connection between connected

clients to GWN7600/GWN7600LR’s Wi-Fi access point. Client isolation

can be helpful to increase security for Guest networks/Public Wi-Fi.

Three modes are available:

•

Internet Mode:

Wireless clients will be allowed to access only the

internet services and they cannot access any of the management

services, either on the router nor the access points

GWN7600/GWN7600LR.

•

Gateway MAC Mode:

Wireless clients can only communicate with

the gateway, the communication between clients is blocked and

they cannot access any of the management services on the

GWN7600/GWN7600LR access points.

•

Radio Mode:

Wireless clients can access to the internet services,

GWN7xxx router and the access points GWN7600/GWN7600LR but

they cannot communicate with each other.

Содержание GWN7000




























































































































































Результаты поиска

Содержание GWN7000

Отзывы:

Похожие инструкции для GWN7000

Бренды по названию

Популярные бренды

Grandstream Networks GWN7000, Руководство пользователя

Результаты поиска

Содержание GWN7000

Отзывы:

Похожие инструкции для GWN7000

Бренды по названию

Популярные бренды