~5~
~6~
A computer connected to the same network as the GSC3505/GSC3510 can dis-
cover and access its configuration interface using its MAC address :
1. Locate the MAC address on the MAC tag of the unit, which is on the underside
of the device, or on the package.
2. From a computer connected to same network as the GSC3505/GSC3510, type
in the following address using the GSC3505/GSC3510’s MAC address on your
browser:
http://gsc_<mac>.local
Example:
if a GSC3505/GSC3510 has the MAC address C0:74:AD:11:22:33, this
unit can be accessed by typing
http://gsc_c074ad112233.local
on the browser.
ACCESSING THE CONFIGURATION INTERFACE
For more information, please download the GSC3505/GSC3510
User Manual from:
http://www.grandstream.com/support
ZH
GSC3505/GSC3510不预设对医院，执法机构，医疗
中心(急救服务)以及各种紧急服务的紧急通话服务。
用户必须自行设定紧急通话功能。用户必须自行购
买SIP兼容的网络电话服务，正确的设定GSC3505/
GSC3510使用该服务，并定期测试您的配置以确保
GSC3505/GSC3510如预期工作，否则请购买传统无
线或有线电话服务来拨打紧急通话。
Grandstream Networks 公司的GSC3505/GSC3510
不支持紧急通话服务。Grandstream
Networks公
司、其管理者和员工以及其相关机构对此所造成的
任何索赔、损失或者损害都不负有任何法律追究责
任。在此，您将无权对任何以及所有由于无法通过
GSC3505/GSC3510拨打紧急电话以及没有遵照前段
文字描述而造成紧急通话失败的事件提出诉讼。
GSC3505/GSC3510 can be powered on using PoE/
PoE+ switch or PoE injector using following steps:
Step 1:
Plug a RJ45 Ethernet cable into the net-
work port of the GSC3505/GSC3510.
Step 2:
Plug the other end into the power over Eth-
ernet (PoE) switch or PoE injector.
POWERING AND CONNECTING GSC3505/GSC3510
Network Port
RJ45 Ethernet
cable to Power
over Ethernet
(PoE) Switch or
PoE injector.
Connecting Wiring Seat
GSC3505/GSC3510 support to connect a "Key &
LED" or "Normal Key" to 2-pin port via Wiring Seat.
Step 1:
Take the wiring seat from the install kits.
Step 2:
Connect the Key & LED or Normal Key with
the wiring seat (as shown in the illustration on the
right).
Note:
This port supports the parallel connection
of an incandescent lamp (with less than 1W) or an
LED lamp (with less than 100mA).
2-pin Port
Wiring Seat
Key with LED
or Normal key
