●
Account status
: Shows Account registration status.
●
System Status
: Press to enter the sub menu for Hardware Information, Software version and IP
Geographic Information.
Settings
Settings sub menu contains the following options:
- Account Settings
: Enable/Disable SIP account, Configures Account Name, SIP server’s address, SIP
User ID, SIP Auth ID, SIP Password, Outbound Proxy, and Voice Mail Access Number.
- Call Settings
: Enable/Disable
DND
, Enable Disable
Auto Answer
for SIP account, Enable/Disable
Call
Forward (Forward All/Busy/No Answer).
- Basic Settings:
●
Sounds:
Configures account ringtone and adjusts volume settings by pressing left/right arrow key.
●
Date Time:
Adjusts Time and Date displaying format.
●
Time Zone:
Choose your Time Zone from the list by scrolling with UP/DOWN keys.
●
Language
: Selects the language to be displayed on the phone’s LCD. Users could select Automatic for
local language based on IP location if available. By default, it is Auto.
●
Keypad Lock
: Enables/Disables Keypad lock. Users can choose the Keypad Lock type (All
Keys/Functional keys) and set up the lock password. If users enabled Keypad lock without
configuring a password; They can unlock the phone by pressing on the unlock softkey.
●
Headset Type
: Choose the headset type of the headset connect to the phone. Users could choose
Normal, Plantronics EHS, Jabra EHS, Sennheiser EHS.
- Advanced Settings:
●
Upgrade
: Check for upgrade by contacting the firmware upgrade server.
●
Sys Log:
Configures Syslog level, Transport protocol and Syslog Server’s address.
●
Security
: Enables disables Web and SSH access.
●
Alternative Firmware
: Press
Switch/Convert
softkey to switch between the dual firmware versions
loaded to the phone. The phone will reboot with the chosen version.
●
Factory Reset
: Perform Factory reset to the phone. All device configuration and user data will be lost
after factory reset
- Ethernet Settings:
●
Internet Protocol
: Selects Prefer IPv4 / Prefer IPv6 / IPv4 only or IPv6 only. The default setting is
“IPv4 only”.
●
IPv4 Settings:
Selects IP mode (DHCP/Static IP/PPPoE); Configures PPPoE account ID and
password; Configures static IP address, Netmask, Gateway, Preferred DNS server
●
IPv6 Settings
: Selects IP mode (DHCP/Static IP); Configures static IP address, IPv6 Prefix (64 bits),
IPv6 Preferred DNS server.
●
VLAN Settings
: Enables CDP/LLDP, Configures LLDP TX interval, Enables Manual VLAN
Configuration, Configures Layer 2 QoS 802.1q (VLAN ID/Priority).
- Wi-Fi Settings (GRP2602W only):
●
Wi-Fi:
Enables/disables Wi-Fi.
●
Wi-Fi Band
: Choose Wi-Fi band (2G , 5G or 2G&5G).
●
Wi-Fi Network
: Scans and displays available Wi-Fi networks.
Messages
●
Instant Messages:
Displays received instant messages
●
Voicemail
: Displays voicemail message information in the following format: Normal/Urgent
Call History
Displays Local Call Logs: “All” Calls / “Missed” Calls/ “Dialed” Calls/ “Answered” Calls.
Contacts
Contacts
sub menu includes the following options:
●
Local Phonebook
●
Local Group
●
LDAP
User could configure phonebooks/groups options here, download phonebook XML to the phone and
search and dial from the local phonebook and search and dial from LDAP phonebook.
Factory Functions
Factory Functions sub menu includes the following options:
●
Audio Loopback:
Speak to the phone using speaker/handset/headset. If you can hear your voice, your
audio is working fine. Press Return Softkey to exit audio loopback mode.