P a g e
|
52
GDS3705 User Manual
Version 1.0.1.16
Parallel Hunting:
The configured extensions and/or IP
addresses will ring simultaneously (up to 4 simultaneous SIP
calls).
Number Called When Door
Bell Pressed
Configures SIP extension number (SIP Server mode), or IP address with
port number (peering mode), to be called when the Door Bell is pressed:
SIP Server mode:
- The field can be configured to store multiple one or multiple SIP
extensions, if configured with multiple extensions (ex: 1001, 1002, 1003),
separated with “,” the GDS3705 will ring one extension after the other in
a
Serial Hunting Mode
(GDS will ring each extension by default 15
seconds, this can be changed on the Ring Timeout) or ring them
simultaneously in
Parallel Hunting Mode.
- When using UCM, users can also configure there a Ring Group
extension (6400 for example) that will ring multiple extensions
simultaneously, or one by one depending on the Ring Group ring strategy.
- If all phones are GXP21XX, users can open door either by pressing
Remote_PIN#
or by pressing Open Door button if already configured.
- If early medial is enabled on phone side, user can send the PIN code
using the Open-Door button before answering the call (Of course users
can open the door also after answering the call).
Peering mode:
-
User
should configure multiple IP addresses of phones instead of SIP
extensions, when Door Bell pressed the GDS3705 will ring the configured
IP Addresses in
Serial or Parallel Mode
according to Doorbell Call Mode
strategy.
Note:
This field supports a Maximum of 256 characters.
Remote PIN to Open the
Door
Configures PIN code stored in the GDS3705, remote SIP phone needs to
input and match this PIN (the PIN is sent via DTMF while in call) so that
the GDS3705 can open the door.
Note:
For enhanced security, when the call is initiated from GDS then only
the numbers existing in “White List” will be able to use DTMF PIN to open
door remotely.
