Grandstream DP750/DP720 Series
Cordless Handset
© 2018 CenturyLink. All Rights Reserved. The CenturyLink
mark, pathways logo and certain CenturyLink product names are
the property of CenturyLink. All other marks are the property of
their respective owners.
GrandStream DP750-DP720 Series QRG
– 041618rev1
Page 3
Transfer (Blind - Unsupervised)
Transfer (Consultative - Supervised)
Blind-Unsupervised Transfer
does not allow you to announce the call:
Blind Transfer:
1.
While on an active call, press the
Options
soft key.
2.
With
Transfer
highlighted, press the
Select
soft key.
3.
Enter a
10-digit number
or
extension
to transfer to.
4.
Press the
Transfer
soft key.
You’re dropped from the call and the transfer completes with no
opportunity to announce the caller.
Consultative Transfer
allows you to announce the call before completing
the transfer:
Consultative Transfer:
1.
While on an active call, press the
Options
soft key.
2.
Navigate down to
New Call
and press the
Select
soft key.
3.
Enter a
10-digit number
or
extension
to transfer to and press
the
Send
soft key.
4.
When the party answers, announce the transfer.
5.
Press the
Options
soft key.
6.
With
Transfer
highlighted, press the
Select
soft key.
You’re dropped from the call after announcing the transfer, and the transfer
is complete.
Cancel Consultative Transfer:
1.
If the party chooses not to accept the transfer, press the
Red
handset button to disconnect that call.
2.
Press the
Resume
soft key to return to your caller.
Call Forwarding
Do Not Disturb (DND)
Enabling and disabling
Call Forward Always
must be accomplished
using FAC’s (feature access codes). You cannot use the Forwarding
option under
Menu
>
Call Settings
>
Forward
:
To Enable Forwarding:
1.
On the keypad, enter
*72+10-digit number
or
extension
you
want to forward to.
2.
Press the
Green
handset button or the
Speakerphone
button
to send the call.
3.
Receive an audible that your call forwarding service has been
activated successfully.
To Disable Forwarding:
1.
On the keypad, enter
*73
.
2.
Press the
Green
handset button or the
Speakerphone
button
to send the call.
3.
Receive an audible that your call forwarding always service
has been deactivated successfully.
From the handset, place any line appearing on the device in DND mode;
incoming calls roll to voicemail when with DND enabled:
To Enable DND:
1.
Press the
Menu
soft key.
2.
Navigate down to
Call Settings
, and press the
Select
soft key.
3.
With
Do Not Disturb
highlighted, press the
Select
soft key.
4.
With the correct line highlighted, press the
Select
soft key.
5.
Navigate up to highlight
Enabled
, press the
Save
soft key.
To Disable DND:
1.
Press the
Menu
soft key.
2.
Navigate down to
Call Settings
, and press the
Select
soft key.
3.
With
Do Not Disturb
highlighted, press the
Select
soft key.
4.
With the correct line highlighted, press the
Select
soft key.
5.
Navigate down to highlight
Disabled
, press the
Save
soft key.
Contacts
– Add New Contact
Contacts
– Dialing From
Manually add private or shared contacts.
Private
contacts appear
within contacts on your handset only,
Shared
contacts appears within
contacts on every handset paired to the same base unit:
To Add a New Contact:
1.
Press the
Menu
soft key.
2.
With
Contacts
highlighted, press the
Select
soft key.
3.
Use the up/down navigation key to select
Private
or
Shared
,
and press the select soft key.
4.
Press the
Options
soft key.
5.
Navigate down to highlight
New Contact
, press the
Select
soft key.
6.
Using the letters on the keypad, enter a
First Name
,
Last
Name
for your contact
7.
Enter at least one number in the Home, Work or Mobile fields
(only one number is required, but if numbers are added to
each field, each number can be dialed for that contact).
8.
Use the left/right navigation keys to assign a unique
Melody
for that contact.
9.
Press the
Save
soft key.
Numbers can be dialed for
Contacts
saved to either the
Private
or
Shared
contacts list:
To Dial from a Contracts list:
1.
Press the
Menu
soft key.
2.
With
Contacts
highlighted, press the
Select
soft key.
3.
Use the up/down navigation key to select
Private
or
Shared
, and
press the
Select
soft key.
4.
Use the up/down navigation keys to locate your contact, .and
press the
Options
soft key.
5.
Navigate down to
Edit Dial
, and press the
Select
soft key.
6.
With the number displayed, click the
Call
soft key which places
your call.
