IP PHONE – GRANDSTREAM BUDGE TONE-100 – Operating Manual
pag.6
Access to IP Phone when the DHCP is not working
1. configure the static IP address on the LAN port of your PC.
Click on “
Start \ Settings\ Network connections
“, double
click on “
Local area connections (LAN)”
.
In the new window click on
“Properties”
and then double
click on “
Internet Protocol (TCP/IP)”.
Verify that the option “
Use the following IP address”
is
activated, or modify the setting and fill in the following
fields::
IP address:
192.168.0.x (in the example of the right site,
it is used the address 172.25.25.100)
Subnet mask:
255.255.255.0
Default gateway:
192.168.0.1
For
DNS servers
should be used the IP addresses
provided by the Internet Service Provider.
Once finished the configuration, press “
OK
” and close all
the opened windows.
2. configure the static IP address on your IP Phone.
Press “MENU” on the IP Phone keyboard, on display of the telephone it will appear “[ 1] dhcP On”, press “MENU”
and then the key “
↓
” or “
↑
” to set “ - dhcP oFF” , at the end press “MENU”.
Press the key “
↓
”, on the telephone display it will appear “[ 2] IP Addr”, press “MENU”, digit 192.168.000.002 and
then press “MENU”.
Press the key “
↓
”, on the telephone display it will appear “[ 3] SubnET”, press “MENU”, digit 255.255.255.000 and
then press “MENU”.
IMPORTANTE
: the changes made will be effective after turning off and turning on of the IP Phone.
3. start your Web Browser (i.e. Internet Explorer), insert the IP address 192.168.0.1 and press “
GO
”.
6. It will appear the window prompt for “Password” in which
you have to insert “admin”.
Attention!
The confidentiality of these data is necessary
in order to guarantee that the equipment configuration is
accessible only by you. We suggest to proceed with the
configuration password change and to write down the
new one.
7. After few moments, the window “Grandstream IP Phone
Configuration” will appear. Here you can change the
parameters configuration of GRANDSTREAM BUDGE
TONE-100, as explained in the following chapter.
IMPORTANTE: :
the changes made are not going to be effective before “Save” and “Reboot” of the IP Phone, as
indicate in the following pages.
