SUN
616
615
PC sheet
1.7
Assemble the roof window vents as shown below in and , using
the Z02 screws attach the 615, 616, and 618’s with the Y8 panel as
shown. Be careful not to strip screw heads. Pay attention to the Y8 panel,
stickers or “x” face the sun. If you are a first time builder refer to your
assembly manual for installation and discard this manual, proceed with
this manual for existing greenhouse users only.
1.8
Insert assembled window into the end of ridge of 607 and slide into
position. See . Window positions are your discretion however, must be
in the middle for support, do not place nearest the front or back as you will
need a 602B support to keep in window vent in place. Place directly across
from each other for best cross draft ventilation, see for optional
placement. Attach the 602B’s as shown between and , after all roof
vents are positioned.
1.9
You may need to remove some
602B’s to slide into place then replace
after roof vents are positioned.
GRANDIO
T I P
Place roof windows in
desired location before
attaching all 602B’s, if
already partially built you will need to
loosen and re attach after installation. .
Y8
618
Z02
Z02
Z02
Z02
Z02
618
Screwdriver
Outside View
615
616
618
616
Z02
Note Correct Orientation
616
618
615
607
SUN
Y8
Y8
4
602B
602B
602B
Inside View of
Roof Vent
ROOF VENT ASSEMBLY
607
